IMPORTANT NOTE: Sleeves are sold and shipped separately to accommodate new construction and replacement requirements.

Features
Environmentally friendly R-410A refrigerant used in all models
Commercial Grade Thru-the-wall Electric Heat models mount flush with exterior walls to create a sleek appearance and unobstructed window views.
May be installed almost anywhere on a wall for optimal placement.
Solid side chassis allows for installation into thicker walls than standard room air conditioners.
Exact fit for Fedders A sleeves. Fits Fedders B sleeves with kit.
The most Energy Efficient Solid-side Air Conditioner available
MoneySaver setting saves energy by turning the fan on and off with the compressor
The Smart Fan feature adjusts the fan speed to maintain the desired temperature
Easy-to-clean filter
3 Speed Fan
Auto memory backup
Easy-to-reach top-mounted controls
Sleeves sold and shipped separately

WallMaster Heat Pump Heating Performance:
Change-over from heat pump operation to resistance operation on models indicated is automatic at a preset outside ambient temperature of approximately 35°F.
Calculate the heat loss of the space to be heated.
As long as the heat loss does not exceed the resistance heating capacity rating of the unit, the heating performance will be satisfactory.
Note: all models will produce condensate. If condensate disposal is desired, an optional drain kit is available.

Defrost Control:
Initiated at 20°F (outdoor coil temperature) and terminated at 43°F (outdoor coil temperature).
During defrost, the compressor stops and the electric heat starts, then operates with the fan to maintain indoor comfort.
Below 43°F, the unit remains in electric heat mode.
During electric heat mode, the unit will achieve the following ratings: 11000/9100 BTU/h, 16.0/14.7 amps, and 3550/2950 watts.

Defrost Drain:
Drain automatically opens at approximately 50°F to prevent condensate from freezing inside drain pan.